GM Built

Shipped Worldwide

Compare Price

Gm Built Engine. I only export this engine as internal shipping cost makes domestic purchase impractical.

Ocean shipping cost to most countries is $500 Local import fees and taxes not included.
$3900 295Hp

350 Cubic inches 4.00" Bore, 3.47" stroke 8.3:1 compression ratio. 290 HP @5100 rpm 326 ft. lbs of torque @ 3750 rpm

• Cast iron 4 Bolt main block with 2 piece rear main seal
• Nodular iron internally balanced crankshaft
• 5.7" Powdered Metal connecting rods
• Cast aluminum flat top pistons.
• Hydraulic flat tappet camshaft.
Intake Lift- .450" Intake Duration @ .050" 222
Exhaust lift- .460" Exhaust Duration @ .050" 222
Lobe Centerline-114
• Cast iron 76cc 1.94”I/1.50”E heads
• Dual plane aluminum intake manifold
• Cast iron long water pump
• HEI distributor
• Holley Avenger 670 CFM carburetor
• Fuel pump
• Spark plug wires
• 8” degreed high-rpm harmonic balancer*
• 168 teeth flywheel
• Valve cover, oil pan, timing cover and oil dip stick
GMs warranty - Void outside the USA

Add $300 and I will run the motor for 1 hour under light load to break in the camshaft and look for any signs of problems.

Additionally I will add a limited warranty for overseas purchase.